Equipped with self-sealing and self-cleaning gasket, clutch to adjust the direction of the spray and steel spring. They have swivel internal friction, 1/2" attack, with spray head except LESS version, with lifting of 5 cm in the US-2 model  and 10 cm in the US-4 model.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Used for UNISPRAY series and 1800, depending on the model (color) could be change spray range from 0.6 to 4.2 m and the spray angle, that could be full circle, 3/4 circle, 1/2 circle, 1/3 of the circle, 1/4 circle, side strip, center strip, end strip.

Series:

 

 

 

 

 

Used for UNISPRAY and 1800 series, allow to adjust irrigation angle to ensure the proportionality of the distribution. Depending on the model range from 0.6 to 5.4m.

Series:

4 VAN series  (plane angle 0°)             15 VAN series (standard 23°)

6 VAN series  (plane angle 0°)             18 VAN series (long range 26°)

8 VAN series  (low angle 5°)                10 VAN series (low angle 10°)

12 VAN series (sottostandard 15°)

With the rotation of the collar 10, 12, 15, 18 series cover from 0 to 360 degrees; 4, 6, 8 series from 0 to 330°.

 

 

 

 

The shaped head provides 30 rotating different angle spray to cover provided area with a maximum of 3 rpm. The proportional rainfall is 15.2 mm/h, therefore we must be careful not to join in the same area rotating nozzle and static traditional spray heads, reduced flow by approximately 60% compared with conventional static irrigator spary heads,  operating pressure 1.4 ÷ 3.8 bars, range from 4 m to 7.6 depending on the model, suitable to replace malfunctioning irrigator for lack of pressure or flow.

 

RN-13-18 series (range from 4 to 5,5m, from 90 to 360°)

RN-17-24 series (range from 5,2 to 7,3m, from 90 to 360°)

 

 

 

 

The 3500 irrigator (1/2" attack) cover a range from 4,5 to 10m, with an area setting from 40 to 360° (adjustable with screwdriver), with gasket to keep clean, rubber cover, lifting of 10,2 cm.
Each irrigator comes with a key lifting the dinghy and 6 nozzles.

3 nozzles "low angle" 10° (measures 0,75-1,0-1,5) from 4 to 7,3m and 3 nozzles "Standard" 25° (measures 2,0-3,0-4,0) from 7,5 to 10,7m.

Also available with SAM check valve.

 

 

 

 

 

Opening and closing device for the flow "water stop function" (STC) except model 5004 PC, 3/4" female attack, in PC  models the area regulation is done with a screwdriver, the opening and closing device is also adjustable (also while running), clutch on the turret for an easy setting of the left margin of inversion, gasket to keep clean. Flow range from 8 to 15.2m, preassure from 1.5 to 4.5 bar, lifting of 10, 15, 30cm.

"Standard" nozzles 25° (measures from 1,5 to 8,0) from 10 to 14 mt.

"Low angle" nozzles 10° (measures from 1,0 to 3,0) from 8 to 11 mt.

 

 

 

 

Dynamic irrigator created to use in public plants or sport plants, inner circle and variable area, stainless steel tower, Arch Memory device with automatic return, spring-reinforced for a perfect return of the turret, lifting of 12.5 cm. Antiwear mechanism friction, bronze reinforced groove to withstand kicks or side blows, adjustment work range from 50° to 330°, right/left bar setting, Seal-a-Matic (SAM) valve, maximum water column 3.1m.  Selfsetting turbine stator, 3/4" female attack, range from 10 to 16.8 m. Pressure from 2.1 to 6.2 bar, 8 front interchangeable nozzles "Standard" 25°.

 

 

 

Suitable for irrigation of large areas. With shockproof rubber cap, supplied with interchangeable nozzles "Standard". Arch Memory device with automatic return, with SAM check valve, also usable in slope land. Reduction of flow adjustable with screwdriver. Turbine movement water-lubricated, lifting of 10 cm, visible surface 5cm, multifunction gasket, 1" female threaded attack.

6504 PC/FC range from 15 to 19,8m (also steel version)
7005 PC/FC range from 14,9 to 21,5m (also steel version)
8005 PC/FC range from 18,7 to 24,7m (also steel version)